Getting started with your Avolites product

Titan PC Suite

The Titan software requires the Microsoft .NET Framework v4.7 or latest to run, this will normally be installed on Windows 10 by default. For Windows 7 and 8.1 you may need to run Windows Update or download it from the Microsoft website.

Important: Please run the Titan PC Suite installer before plugging in your Avolites hardware to ensure that the drivers are installed correctly.

When installing Titan PC Suite, you are given the option to install Titan Mobile, Titan Simulator and Titan Go, if selected, these will appear as separate icons in the Start Menu.

After the software has been installed, Titan Mobile and Titan Go require the hardware to be connected before the application can be used. If the software does not recognise the hardware and displays the message ‘Dongle Not Found’, the firmware may need to be updated.

The firmware can be updated by running USB Expert Console (Located in Windows Start Menu > Avolites) then selecting [Update Now] from the Service tab.

The minimum and recommended PC specifications can be found here.

Titan Consoles

Please ensure you save and backup your shows before attempting to upgrade any software. Full instructions for upgrading both with an installer and a recovery stick are supplied with the download.

The installer upgrade procedure is reproduced briefly below:

1. Save the software to the root directory of a USB stick or other storage device.
2. Insert the USB stick in the console and select Control Panel > Titan Installers > Titan 13.0 Setup on the Tools menu.
3. Follow the instructions presented by the installer, taking care to read each step carefully.
4. Once the setup completes you need to restart the console.
5. When the console restarts it should be updated to the new software; please check this by reading the version number in system mode.

The firmware can be updated by running USB Expert Console (Located in Tools Menu > Control Panel) then selecting [Update Now] from the Service tab.

Ai

Ai will install by default to this location:

C:/Avolites/Ai/Distrib

Ai can run from any directory, however it is always advised to keep the Distrib in this location and not rename it. It is also advised to store your project assets in the Distrib so they can easily be obtained for reference. The only example here is your media which is advised as being stored on a separate dedicated media drive.

Multiple instances of Ai can be installed at a time, all that is required is that the existing Distrib is renamed to something else. Before installing a new version of Ai it is advisable to rename or delete any existing Distrib folder before proceeding.

Older files left over from a previous install can produce undesired effects when overwritten with a new install. Renaming the folder is the safest option as nothing is destroyed and can also allow you to have multiple versions of Ai installed.

The firmware can be updated by running USB Expert Console (Located in Tools Menu > Control Panel) then selecting [Update Now] from the Service tab.

The minimum and recommended PC specifications can be found here.